G2L36 CNC Vertical Steel Bar Bending Center

Technical parameters

Rebar processing diameter range	Φ12mm—36mm
bending angle	Positive bend: 0°~180°; negative bend: 0°~-120°
bending direction	Can be bent in both directions
Bending accuracy	±1°
Length accuracy	±1mm/m
Bending speed	65°/ s
Small bending axis spacing	600mm
Short length of curved side	60mm
Overall dimensions	12*1.5*1.6m
power	Total power 17.5KW (actual power consumption 5KW/h), 380V, 50-60Hz
Reinforcement bar diameterΦ	D10  D12  D16  D18  D20  D25  D32   D36
Processing count	6   5    4    3    2     1     1    1
The processing efficiency per shift (8 hours) is about 30 tons of rebarFeatures

1. Intelligent operation and modular input minimize operator requirements. 2. Easy adjustment of processing length and angle. 3. Servo PLC control and computer programming, capable of storing hundreds of patterns. 4. Bidirectional CNC mobile bending, with independent movement of the single head. 5. High production efficiency, with an average daily processing capacity of 5,500 pieces per person, replacing 22 workers, more than 10 times the output of traditional processing equipment, reducing labor costs. 6. The machine is equipped with 485 communication and internet connectivity, allowing real-time monitoring of production output and working hours. Operation Procedure 1. Turn on the CNC machine and turn the power switch to the "ON" position. 2. Access the machine control system interface. 3. Find the "Angle Adjustment" option or related parameter setting options on the control system interface. 4. Select the two angles in opposite directions according to the angle you want to adjust. 5. Enter or adjust the relevant parameters to accurately set the desired angle. 6. After confirming that the adjusted parameters are correct, save the settings. 7. Press the Start button. The machine will then bend the rebar according to the set angle parameters.